TAZ

base48 TAZ

Donated by LulzBot as part of the 4th annual hackerspace giveaway [1]

• TAZ 4 Manual (pdf

Parameters

• Build envelope (fw limited) 298x275x250mm

Components

Bed

• 24V 360W silicone heater from NPH
• 3mm borosilicate
• 100k Honeywell thermistor 135-104LAG-J01
• 300x300mm

Hotend

• E3D v5
• 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
• 12V heater on 24V!

Firmware

• https://github.com/hackerspace/newMarlin
  • base48_taz branch

Usage

• 250000 baudrate
• changing Z offset:
  • M206 Z<new offset in mm>
• changing E steps/mm
  • M92 E<new steps/mm>
• save to EEPROM with M500
• print current settings with M503

TODO

• ! Remove and tighten hotend !

• Probe - https://forum.lulzbot.com/viewtopic.php?f=16&t=2123&sid=806e32143761049a8b7b8b4cdf860f7d
  • Needs 24V & optocoupler
  • Holder cca https://www.thingiverse.com/thing:617615
  • or https://www.thingiverse.com/thing:816452

• Enclosure
  • https://www.thingiverse.com/thing:689852/

• Fume filter
  • https://www.thingiverse.com/thing:929473/

• Knob extender
  • https://www.thingiverse.com/thing:753667

• Filament Tube Holder
  • https://www.thingiverse.com/thing:811535

• 1.75 upgrade
  • https://www.thingiverse.com/thing:403347
  • https://learn.adafruit.com/downloads/pdf/taz-4-1-dot-75-filament-upgrade.pdf

• Out of filament sensor
  • https://www.thingiverse.com/thing:629286/