From 3D printer model to CNC machining: Difference between revisions

From base48
imported>Nio
imported>Nio
Line 33: Line 33:


[https://media.weerg.com/wp-content/uploads/2020/01/29092815/Threads_Table_ENG.pdf weerg Threads_Table_ENG.pdf]
[https://media.weerg.com/wp-content/uploads/2020/01/29092815/Threads_Table_ENG.pdf weerg Threads_Table_ENG.pdf]
 
[https://support.weerg.com/how-do-i-design-the-threads-cnc https://support.weerg.com/how-do-i-design-the-threads-cnc]
[https://www.youtube.com/watch?v=jVcTpP3qqX8&ab_channel=JonathanKayne yt Tutorial How to Convert from OpenSCAD to STEP format by JonathanKayne]
[https://www.youtube.com/watch?v=jVcTpP3qqX8&ab_channel=JonathanKayne yt Tutorial How to Convert from OpenSCAD to STEP format by JonathanKayne]

Revision as of 10:45, 16 January 2021

Disclaimer

Lets assume we have modelled a 3D printable part and it has been test printed and it works. Just because it's from plastic it's too weak for some application or it's not heat resistant enough. What if we wanted to take a 3D design and order aluminum or steel parts to be machined in factory?

There is a lot that has to be specified for well designed mechanical part, various tolerances, roughness of surfaces. This information will be missing when we hand over just some exported 3D model, so they have to be additionaly supplied.

I succeeded to get quick quote with properly rendered part by uploading .step file.

Workflow: OpenSCAD to Weerg service using FreeCAD

1.take your .scad design

2.run FreeCAD

3.choose OpenSCAD workspace

4.open document -> .scad

5.now you should see your finished part

6.select only the finished part from list of object on panel on the left

7.export -> .step

8.upload to weerg.com get instant quote and choose CNC machining


If you want to add threaded holes you can add them manually in their instant quoter, but you will have to have holes of precise diameter in your .scad design. If you have precise hole dimensions they will appear in a list in quoter. 2.5 mm hole is for M3 threaded hole, 3.3 mm is for M4 and 4.2 mm is for M5.

weerg Threads_Table_ENG.pdf https://support.weerg.com/how-do-i-design-the-threads-cnc yt Tutorial How to Convert from OpenSCAD to STEP format by JonathanKayne