base48 - Recent changes [en]

C64

Klubko — Fri, 27 Mar 2026 15:51:06 GMT

← Older revision		Revision as of 15:51, 27 March 2026
(One intermediate revision by the same user not shown)
Line 28:		Line 28:
	* There's at least one good DD floppy available for use		* There's at least one good DD floppy available for use
	** Needs DD, not HD. That is "360K double-sided" for PCs, not the "1.2MB"		** Needs DD, not HD. That is "360K double-sided" for PCs, not the "1.2MB"
	** There's ~~technically~~ a deck of ~15 floppies		** There's a deck of ~15 floppies. Some data has been [[C64#Data from floppies\|backed up]]
	*** TODO: backup, inspect
	* There's a DIY xu1541 USB adapter (works with OpenCBM)		* There's a DIY xu1541 USB adapter (works with OpenCBM)

Line 40:		Line 39:

	TODO: make this section useful		TODO: make this section useful

			== Data from floppies ==
			Here are D64 images and pictures and things: https://codeberg.org/lubko/c64-floppy-dumps

	== Whence the machine cometh?? ==		== Whence the machine cometh?? ==

Windows VM

Vega — Thu, 26 Mar 2026 21:06:08 GMT

Created page with "=== public Windows vm at base === For members use, there is a relatively high performance windows vm provided, which you can just RDP into from base lan. The recommended rdp client to use is [https://remmina.org/ remmina]. Hardware is: 8 vCPUs of the proxmox cluster, 48gb of ram (dedicated, balooning disabled), a 256gb virtual disk, and a dedicated GTX1060-6G passed through. ==== Connection details: ==== {| class="wikitable" |+ !host: !windows.at.base48.cz |- |user:..."

New page

=== public Windows vm at base ===
For members use, there is a relatively high performance windows vm provided, which you can just RDP into from base lan. The recommended rdp client to use is [https://remmina.org/ remmina].

Hardware is: 8 vCPUs of the proxmox cluster, 48gb of ram (dedicated, balooning disabled), a 256gb virtual disk, and a dedicated GTX1060-6G passed through.

==== Connection details: ====
{| class="wikitable"
|+
!host:
!windows.at.base48.cz
|-
|user:
|your keycloak username/nick
|-
|password:
|generated by the connector (see below)
|}

==== windows keycloak connector ====
Since microsoft wants you to use Active Directory for single-sign-on, instead we have a much simpler solution that works with our [[keycloak]], allowing you to use your [[MemberPortal/meta|memberportal]] credentials to generate a windows account with a username and password. To do so, visit the connector at http://windows-keycloak-connector.at.base48.cz/ from base lan, login with your keycloak account and click Create - you will be shown your username and password for the rdp connection. Should you ever forget your password, you can use this connector to reset it. The passwords are not stored anywhere and you can change the password to one you prefer once you log in.

==== Software available: ====

* Solidworks (2022, premium with CAM and fluidsim)
* Anything more you want really just ask vega

Woodworking

Dxvlt — Thu, 26 Mar 2026 15:44:38 GMT

added some rules.

← Older revision		Revision as of 15:44, 26 March 2026
Line 1:		Line 1:
			== Rules ==

			# Make sure you know how to operate any machinery safely. Read the manuals in the shelf or look it up online.
			# If you don't know how to use a specific machine, ask the owner to give you an I instructional.
			# Make sure you check your wood for old nails and lodged metal before cutting not to damage the blades.
			# DO NOT cut metal on the saws. If you need to cut aluminium, move the saw to the metal corner. Leftover metal chips may damage someone else's workpiece.
			# ALWAYS use the dust extractor or shop-vac to capture as much chips as possible.
			# ALWAYS clean up after yourself and leave the desks usable for someone else. Mess attracts more mess.
			# Do not use any material that is tagged by someone's name. If a piece is not marked, you may use it freely. If you're unsure if a piece of material belongs to someone, ask around.
			# ALWAYS use the recommended safety gear. Use the pushstick on the table saw. Triple check that your fingers are not in the way. Use the protective glasses to prevent wood chips flying off into your eyes. Wear a respirator when sanding or cutting extensively. Your lungs will thank you. Wear earmuffs when cutting, some of the machines are quite loud.

	[[Category:Equipment]]		[[Category:Equipment]]
	{{Project		{{Project

PlotBot

Klubko — Wed, 25 Mar 2026 18:15:24 GMT

← Older revision		Revision as of 18:15, 25 March 2026
(2 intermediate revisions by the same user not shown)
Line 6:		Line 6:
	\|status=active		\|status=active
	\|tags=hw		\|tags=hw
	\|shortdesc=~~Our Rostock~~		\|shortdesc=Whiteboard drawing bot
	\|created=2025-25-09		\|created=2025-25-09
	}}		}}
Line 24:		Line 24:

	== Our modifications ==		== Our modifications ==
	Our FreeCAD model is here:		Our FreeCAD model is here: [https://codeberg.org/lubko/turtle-robot/src/branch/main/tiny_turtle_plotter_CAD.FCStd tiny_turtle_plotter_CAD.FCStd]

	~~https://codeberg.org/lubko/turtle-robot/src/branch/main/tiny_turtle_plotter_CAD.FCStd~~		Modified parts typically have "new" in their name. Sorry if it's messy. First time FreeCAD.

	Modified parts typically have "new" in their name.

	<gallery>		<gallery>
Line 40:		Line 38:
	File:Turtle-carriage.jpg\|Wheel carriage		File:Turtle-carriage.jpg\|Wheel carriage
	File:Turtle-steppers.jpg\|Stepper motors		File:Turtle-steppers.jpg\|Stepper motors
			File:Turtle-pen-lifter.jpg\|Hacked pen lifter
	</gallery>		</gallery>

Line 55:		Line 54:
	=== Power banks ===		=== Power banks ===
	Ones we had didn't fit. We adjusted the layers 1 and made different versions of the upper ring to hold them in place.		Ones we had didn't fit. We adjusted the layers 1 and made different versions of the upper ring to hold them in place.

			=== Pen lifter ===
			One robot is equipped with a more precise pen lifter that utilizes linear motion bearings (LM8) on 8mm rods.

	== Control Board ==		== Control Board ==
	[[File:Turtle-bot-v3-pcb-back-etch.png\|thumb\|Traces can be drawn on copper laminate (cuprexit) with toner transfer technique and chemically etched. Negative printout for PCB etching: [https://~~github~~.~~com~~/~~lkundrak~~/turtle-robot/~~raw~~/~~refs/heads~~/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]]]		[[File:Turtle-bot-v3-pcb-back-etch.png\|thumb\|Traces can be drawn on copper laminate (cuprexit) with toner transfer technique and chemically etched. Negative printout for PCB etching: [https://codeberg.org/lubko/turtle-robot/src/branch/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]]]
	We've drawn a PCB that can be sent to a manufacturing house, but is also optimized for chemical or CNC etching!		We've drawn a PCB that can be sent to a manufacturing house, but is also optimized for chemical or CNC etching!

	Schematic: [https://~~github~~.~~com~~/~~lkundrak~~/turtle-robot/~~raw~~/~~refs/heads~~/main/artifacts/turtle-bot-v3-schematic.pdf turtle-bot-v3-schematic.pdf]		Schematic: [https://codeberg.org/lubko/turtle-robot/src/branch/main/artifacts/turtle-bot-v3-schematic.pdf turtle-bot-v3-schematic.pdf]

	Fabrication notes: [https://~~github~~.~~com~~/~~lkundrak~~/turtle-robot/~~raw~~/~~refs/heads~~/main/artifacts/turtle-bot-v3-pcb-fab-notes.pdf turtle-bot-v3-pcb-fab-notes.pdf]		Fabrication notes: [https://codeberg.org/lubko/turtle-robot/src/branch/main/artifacts/turtle-bot-v3-pcb-fab-notes.pdf turtle-bot-v3-pcb-fab-notes.pdf]

	Negative printout for PCB etching: [https://~~github~~.~~com~~/~~lkundrak~~/turtle-robot/~~raw~~/~~refs/heads~~/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]		Negative printout for PCB etching: [https://codeberg.org/lubko/turtle-robot/src/branch/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]

	<gallery>		<gallery>
Line 80:		Line 82:
	Arduino code: https://github.com/vranicka/PlotBot		Arduino code: https://github.com/vranicka/PlotBot

	=== More pictures ===		== More pictures ==
	<gallery>		omg somebody please take a picture of it drawing and writing<gallery>
	File:20260119 145224.jpg\|Robot coming alive		File:20260119 145224.jpg\|Robot coming alive
	File:555534763 1215584797278549 3519708831245411009 n.jpg\|Robot skeleton		File:555534763 1215584797278549 3519708831245411009 n.jpg\|Robot skeleton
	File:PlotBot.jpg\|In action		File:PlotBot.jpg\|In action
	</gallery>		</gallery>

File:Turtle-pen-lifter.jpg

Klubko — Wed, 25 Mar 2026 17:55:09 GMT

Klubko uploaded File:Turtle-pen-lifter.jpg Drawing bot pen lifter with bearings and driving rods.

New page

== Summary ==
Drawing bot pen lifter with bearings and driving rods.

PlotBot

Klubko — Wed, 25 Mar 2026 17:53:51 GMT

← Older revision		Revision as of 17:53, 25 March 2026
Line 73:		Line 73:
	File:640446084 1339273764909651 2435820910506464661 n.jpg\|Board fully etched		File:640446084 1339273764909651 2435820910506464661 n.jpg\|Board fully etched
	File:640928983 1339273704909657 7028863716144500154 n.jpg\|Posing for a picture		File:640928983 1339273704909657 7028863716144500154 n.jpg\|Posing for a picture
			File:Turtle-front.jpg\|Perfboards are a no-hassle option
			File:Turtle-pcb1.jpg\|Back side of a perfboard
	</gallery>		</gallery>

File:Turtle-front.jpg

Klubko — Wed, 25 Mar 2026 17:52:09 GMT

Klubko uploaded File:Turtle-front.jpg Drawing bot PCB component side

New page

== Summary ==
Drawing bot PCB component side

File:Turtle-pcb1.jpg

Klubko — Wed, 25 Mar 2026 17:51:34 GMT

Klubko uploaded File:Turtle-pcb1.jpg Drawing bot PCB solder side

New page

== Summary ==
Drawing bot PCB solder side

PlotBot

Klubko — Wed, 25 Mar 2026 17:49:54 GMT

← Older revision		Revision as of 17:49, 25 March 2026
(6 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	~~Original project:~~{{Project		{{Project
	\|name=Base48 PlotBot		\|name=Base48 PlotBot
	\|image=~~20260119_145224~~.jpg		\|image=Turtle-bots.jpg
	\|founder=niklasroy.com/robotfactory		\|founder=niklasroy.com/robotfactory
	\|coops=lubko, vanicka		\|coops=lubko, vanicka
Line 8:		Line 8:
	\|shortdesc=Our Rostock		\|shortdesc=Our Rostock
	\|created=2025-25-09		\|created=2025-25-09
	}}https://hackaday.com/2025/09/02/this-plotter-knows-no-boundaries/		}}

			== What is this ==
			A whiteboard drawing bot project. We didn't design the thing, but we built a couple of robots. Along the way, we made modifications and learned a lot.

			Among things we learned is that it's a perfect project to get start with robotics.

			Here's where it comes from:

			https://hackaday.com/2025/09/02/this-plotter-knows-no-boundaries/

	https://www.niklasroy.com/robotfactory/		https://www.niklasroy.com/robotfactory/

			The above link actually contains everything needed to get the bot going. Below are adjustments for parts we had.

	~~Cost~~:		== Our modifications ==
			Our FreeCAD model is here:

			https://codeberg.org/lubko/turtle-robot/src/branch/main/tiny_turtle_plotter_CAD.FCStd

	~~Material:~~		Modified parts typically have "new" in their name.

			<gallery>
			File:555688595 1215584740611888 2776984424721907890 n.jpg\|3D-printed parts for original build
			File:Turtle-endstop.jpg\|Different endstop microswitch
			File:Turtle-switch-ball.jpg\|Different size roller and endstop
			File:Turtle-ball.jpg\|Roller ball
			File:Drawbot-ball2.jpg\|Roller ball
			File:Turtle-wheels.jpg\|Wheels and tyres
			File:Turtle-wheels1.jpg\|Wheels
			File:Turtle-carriage.jpg\|Wheel carriage
			File:Turtle-steppers.jpg\|Stepper motors
			</gallery>

	~~3D print changes:~~		=== Endstops ===
			The microswitches come in different shapes and forms. We added extra prongs to the bumper ring to engage with wider range of microswitches.

			=== Roller ball ===
			We used a larger furniture ball, which in turn means we had to make room in the parts in two lowest layer and make the wheels larger.

	~~Arduino code: https://github~~.~~com/vranicka/PlotBot~~		=== Wheels ===
			The wheels were too small, possibly because our roller ball was bigger. They were also rubbing against layers 1 and 2, and appeared to be made for 5mm shaft in the stepper (our had 6mm). This has, of course, thrown off the geometry. a little.

	=== Control Board ===		We also had different size tyres.

			=== Power banks ===
			Ones we had didn't fit. We adjusted the layers 1 and made different versions of the upper ring to hold them in place.

			== Control Board ==
	[[File:Turtle-bot-v3-pcb-back-etch.png\|thumb\|Traces can be drawn on copper laminate (cuprexit) with toner transfer technique and chemically etched. Negative printout for PCB etching: [https://github.com/lkundrak/turtle-robot/raw/refs/heads/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]]]		[[File:Turtle-bot-v3-pcb-back-etch.png\|thumb\|Traces can be drawn on copper laminate (cuprexit) with toner transfer technique and chemically etched. Negative printout for PCB etching: [https://github.com/lkundrak/turtle-robot/raw/refs/heads/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]]]
			We've drawn a PCB that can be sent to a manufacturing house, but is also optimized for chemical or CNC etching!

	Schematic: [https://github.com/lkundrak/turtle-robot/raw/refs/heads/main/artifacts/turtle-bot-v3-schematic.pdf turtle-bot-v3-schematic.pdf]		Schematic: [https://github.com/lkundrak/turtle-robot/raw/refs/heads/main/artifacts/turtle-bot-v3-schematic.pdf turtle-bot-v3-schematic.pdf]

Line 32:		Line 66:
	Negative printout for PCB etching: [https://github.com/lkundrak/turtle-robot/raw/refs/heads/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]		Negative printout for PCB etching: [https://github.com/lkundrak/turtle-robot/raw/refs/heads/main/artifacts/turtle-bot-v3-pcb-back-etch.pdf turtle-bot-v3-pcb-back-etch.pdf]

	~~=== Gallery: ===~~		<gallery>
	<gallery ~~mode="slideshow"~~>		File:630198759 1327012059469155 4819732943989781073 n.jpg\|Cutting copper boards
	~~File:555688595 1215584740611888 2776984424721907890 n.jpg~~		File:631316442 1327012126135815 8139523202493073450 n.jpg\|Chilling in a pool after toner transfer
	~~File:555534763 1215584797278549 3519708831245411009 n.jpg~~		File:640173458 1339273461576348 8523389435759424901 n.jpg\|Toner transferred
	File:630198759 1327012059469155 4819732943989781073 n.jpg		File:633395964 1327012302802464 3349586654434092500 n.jpg\|Copper etching
	File:631316442 1327012126135815 8139523202493073450 n.jpg		File:640446084 1339273764909651 2435820910506464661 n.jpg\|Board fully etched
	File:~~633395964 1327012302802464 3349586654434092500~~ n.jpg		File:640928983 1339273704909657 7028863716144500154 n.jpg\|Posing for a picture
	File:~~640173458 1339273461576348 8523389435759424901~~ n.jpg		</gallery>
	File:640446084 1339273764909651 2435820910506464661 n.jpg
	File:640928983 1339273704909657 7028863716144500154 n.jpg		== Software ==
	File:PlotBot.jpg		Arduino code: https://github.com/vranicka/PlotBot

			=== More pictures ===
			<gallery>
			File:20260119 145224.jpg\|Robot coming alive
			File:555534763 1215584797278549 3519708831245411009 n.jpg\|Robot skeleton
			File:PlotBot.jpg\|In action
	</gallery>		</gallery>

File:Turtle-endstop.jpg

Klubko — Wed, 25 Mar 2026 17:02:14 GMT

Klubko uploaded File:Turtle-endstop.jpg Draw bot endstop closeup

New page

== Summary ==
Draw bot endstop closeup

File:Drawbot-ball2.jpg

Klubko — Wed, 25 Mar 2026 17:01:50 GMT

Klubko uploaded File:Drawbot-ball2.jpg Drawing bot roller ball closeup

New page

== Summary ==
Drawing bot roller ball closeup

File:Turtle-ball.jpg

Klubko — Wed, 25 Mar 2026 17:01:23 GMT

Klubko uploaded File:Turtle-ball.jpg Drawing bot wall

New page

== Summary ==
Drawing bot wall

File:Turtle-switch-ball.jpg

Klubko — Wed, 25 Mar 2026 17:01:02 GMT

Klubko uploaded File:Turtle-switch-ball.jpg Draw bot detail of roller ball and microswitch.

New page

== Summary ==
Draw bot detail of roller ball and microswitch.

File:Turtle-carriage.jpg

Klubko — Wed, 25 Mar 2026 17:00:22 GMT

Klubko uploaded File:Turtle-carriage.jpg Drawing bot wheel carriage.

New page

== Summary ==
Drawing bot wheel carriage.

File:Turtle-wheels1.jpg

Klubko — Wed, 25 Mar 2026 16:59:32 GMT

Klubko uploaded File:Turtle-wheels1.jpg Drawing bot wheels

New page

== Summary ==
Drawing bot wheels

File:Turtle-bots.jpg

Klubko — Wed, 25 Mar 2026 16:58:55 GMT

Klubko uploaded File:Turtle-bots.jpg Three drawing plotters in states of assembly.

New page

== Summary ==
Three drawing plotters in states of assembly.

File:Turtle-steppers.jpg

Klubko — Wed, 25 Mar 2026 16:58:09 GMT

Klubko uploaded File:Turtle-steppers.jpg Drawing bot stepper motors.

New page

== Summary ==
Drawing bot stepper motors.

File:Turtle-wheels.jpg

Klubko — Wed, 25 Mar 2026 16:57:20 GMT

Klubko uploaded File:Turtle-wheels.jpg Drawing bot wheels and tires

New page

== Summary ==
Drawing bot wheels and tires

User:Kreyren1/wine-rebuild

Kreyren1 — Mon, 23 Mar 2026 21:17:58 GMT

Created page with "* [ ] Print the mount for 2nd relay out of PACF * [ ] Print the [https://www.printables.com/model/1221132-custom-front-tool-head-carrier-plate-for-qidi-plus/files Custom Front Tool-Head Carrier Plate for Qidi Plus 4] the '''Square Nut''' variant out of PETG and make sure that it all fits together as expected and to be able to put the printer in the shelf to free up the table space ** [ ] Print it out of PC-PBT since PETG won't handle the heat sufficiently * [ ] Print the..."

New page

* [ ] Print the mount for 2nd relay out of PACF
* [ ] Print the [https://www.printables.com/model/1221132-custom-front-tool-head-carrier-plate-for-qidi-plus/files Custom Front Tool-Head Carrier Plate for Qidi Plus 4] the '''Square Nut''' variant out of PETG and make sure that it all fits together as expected and to be able to put the printer in the shelf to free up the table space
** [ ] Print it out of PC-PBT since PETG won't handle the heat sufficiently
* [ ] Print the [https://www.printables.com/model/1150122-qidi-plus-4-lengthways-chamber-heater-casing Qidi Plus 4 Lengthways Chamber Heater Casing] housing out of PETG ad verify that the design works as expected
** Print it out of PC-PBT as PETG is terrible choice

User:Kreyren1

Kreyren1 — Mon, 23 Mar 2026 20:58:24 GMT

VEGAAAAAAAAAAaaaaA

New page

You may be asking, why is there an user called "Kreyren1" ? The answer is simple: VEGA!!

Buse RGB LED Panel

Thebys — Sun, 22 Mar 2026 21:51:27 GMT

TODO

← Older revision		Revision as of 21:51, 22 March 2026
(2 intermediate revisions by the same user not shown)
Line 50:		Line 50:

	== ESPHome integration ==		== ESPHome integration ==
	external_components:		<syntaxhighlight lang="yaml+jinja" line="1">
	- source:		external_components:
	type: git		- source:
	url: ~~<nowiki>~~https://codeberg.org/lubko/buse004-1~~</nowiki>~~		type: git
	path: ./		url: https://codeberg.org/lubko/buse004-1
	components: [ btc004 ]		path: ./
			components: [ btc004 ]
	image:
	- file: ~~<nowiki>~~https://codeberg.org/lubko/buse004-1/raw/branch/main/tux.xpm~~</nowiki>~~		image:
	type: rgb565		- file: https://codeberg.org/lubko/buse004-1/raw/branch/main/tux.xpm
	id: tux		type: rgb565
	- file: ~~<nowiki>~~https://codeberg.org/lubko/buse004-1/raw/branch/main/48.gif~~</nowiki>~~		id: tux
	type: rgb565		- file: https://codeberg.org/lubko/buse004-1/raw/branch/main/48.gif
	id: base48		type: rgb565
			id: base48
	display:
	platform: btc004		display:
	le_pins: [ GPIO05 ]		platform: btc004
	clk_pins: [ GPIO04, GPIO15, GPIO02, GPIO00 ]		le_pins: [ GPIO05 ]
	data_pins: [ GPIO16, GPIO14, GPIO12, GPIO13 ]		clk_pins: [ GPIO04, GPIO15, GPIO02, GPIO00 ]
	update_interval: 10666ms		data_pins: [ GPIO16, GPIO14, GPIO12, GPIO13 ]
	lambda: \|-		update_interval: 10666ms
	static bool state;		lambda: \|-
	it.image(0, 0, (state = !state) ? id(tux) : id(base48));		static bool state;
			it.image(0, 0, (state = !state) ? id(tux) : id(base48));
			</syntaxhighlight>

	== Pictures ==		== Pictures ==
Line 84:		Line 86:
	</gallery>		</gallery>

	~~== TODO ==~~		*

	* ~~<s>Port to ESP*</s>~~
	* Hook to Home Assistant
	* Figure out physical mounting
	* hailsatan

Printers and printing

Thebys — Sun, 22 Mar 2026 21:33:49 GMT

Equipment category

← Older revision		Revision as of 21:33, 22 March 2026
Line 22:		Line 22:
	== 3D Printers ==		== 3D Printers ==
	See [[3D printing lab\|3D Printing lab]].		See [[3D printing lab\|3D Printing lab]].
			[[Category:Equipment]]

Labels

Thebys — Sun, 22 Mar 2026 20:50:41 GMT

← Older revision		Revision as of 20:50, 22 March 2026
(3 intermediate revisions by the same user not shown)
Line 68:		Line 68:

	open my $big, ">$str.png" or die "$str.png: $!";		open my $big, ">$str.png" or die "$str.png: $!";
	print $big render (128, $title, ~~"<a rel="nofollow" class="external free" href=~~"https://wiki.base48.cz/wiki/$str~~">https://wiki.base48.cz/wiki/$str</a>~~")->png;		print $big render (128, $title, "https://wiki.base48.cz/wiki/$str")->png;


	open my $small, ">small-$str.png" or die "$str.png: $!";		open my $small, ">small-$str.png" or die "$str.png: $!";
	print $small render (76, $title, "/wiki/$str", ~~"<a rel="nofollow" class="external free" href=~~"https://wiki.base48.cz/wiki/$str~~">https://wiki.base48.cz/wiki/$str</a>~~")->png;		print $small render (76, $title, "/wiki/$str", "https://wiki.base48.cz/wiki/$str")->png;
	}		}

Line 90:		Line 91:
	do_one('Bong Cleaning Tools', 'Bongs#Maintenance');</syntaxhighlight>		do_one('Bong Cleaning Tools', 'Bongs#Maintenance');</syntaxhighlight>
	=== Printing them out: ===		=== Printing them out: ===
	Use this tool: https://git.familie-radermacher.ch/linux/ptouch-print.git<syntaxhighlight lang="~~perl~~" line="1">		Use this tool: https://git.familie-radermacher.ch/linux/ptouch-print.git<syntaxhighlight lang="shell" line="1">
	# perl makeqr.pl		# perl makeqr.pl
	# ./ptouch-print --image=Library.png		# ./ptouch-print --image=Library.png
	</syntaxhighlight>Minimize waste by chaining multiple labels:<syntaxhighlight lang="~~bash~~">		</syntaxhighlight>Minimize waste by chaining multiple labels:<syntaxhighlight lang="shell" line="1">
	# ./ptouch-print --image=CNC.png --chain		# ./ptouch-print --image=CNC.png --chain
	# ./ptouch-print --image=Library.png --precut --chain		# ./ptouch-print --image=Library.png --precut --chain
	# ./ptouch-print --image=OutputBuffer.png --precut		# ./ptouch-print --image=OutputBuffer.png --precut
	</syntaxhighlight>		</syntaxhighlight>

User:Thebys

Thebys — Sun, 22 Mar 2026 20:35:42 GMT

Created page with "Hello!"

New page

Hello!

Labels

Thebys — Sun, 22 Mar 2026 20:34:29 GMT

Change preformatted to code blocks.

← Older revision		Revision as of 20:34, 22 March 2026
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
	== QR codes ==		== QR codes ==
			[[File:Label Richard.jpg\|thumb\|Example of a real label used in Base48.]]
	Thebys' Brother printer can print monochrome PNG files of height 128px.		Thebys' Brother printer can print monochrome PNG files of height 128px.

Line 89:		Line 90:
	do_one('Bong Cleaning Tools', 'Bongs#Maintenance');</syntaxhighlight>		do_one('Bong Cleaning Tools', 'Bongs#Maintenance');</syntaxhighlight>
	=== Printing them out: ===		=== Printing them out: ===
	Use this tool: https://git.familie-radermacher.ch/linux/ptouch-print.git		Use this tool: https://git.familie-radermacher.ch/linux/ptouch-print.git<syntaxhighlight lang="perl" line="1">
			# perl makeqr.pl
	# perl makeqr.pl		# ./ptouch-print --image=Library.png
	# ./ptouch-print --image=Library.png		</syntaxhighlight>Minimize waste by chaining multiple labels:<syntaxhighlight lang="bash">
			# ./ptouch-print --image=CNC.png --chain
	Minimize waste by chaining multiple labels:		# ./ptouch-print --image=Library.png --precut --chain
			# ./ptouch-print --image=OutputBuffer.png --precut
	# ./ptouch-print --image=CNC.png --chain		</syntaxhighlight>
	# ./ptouch-print --image=Library.png --precut -chain
	# ./ptouch-print --image=OutputBuffer.png --precut

File:Label Richard.jpg

Thebys — Sun, 22 Mar 2026 20:31:21 GMT

Thebys uploaded File:Label Richard.jpg

New page

Example of label used in our hackerspace.

Hackerspace

Thebys — Sun, 22 Mar 2026 18:43:52 GMT

Scope -> events -> calendar links

← Older revision		Revision as of 18:43, 22 March 2026
Line 17:		Line 17:
	* [[Services\|Digital services]]		* [[Services\|Digital services]]
	* Chemistry lab		* Chemistry lab
	* Garden with grill ~~- [https://cryptpad.cz/calendar/#/2/calendar/view/WTp4sfV-5bUaDwQIyyIT7XIBZFS9Yg-rdKAtnCCmfPE/ Regular event]~~		* Garden with a few meters of soil and a grill
	* Repair Corner - [https://~~cryptpad~~.cz/calendar/#/2/calendar~~/view/WTp4sfV-5bUaDwQIyyIT7XIBZFS9Yg-rdKAtnCCmfPE/ Regular event~~]		* Repair Corner - Regular event - [https://nextcloud.at.base48.cz/apps/calendar/embed/oM82tg3RJDLDyZbz/dayGridMonth/now See calendar]
	* Bike Repair Corner - [https://~~cryptpad~~.cz/calendar/#/2/calendar~~/view/WTp4sfV-5bUaDwQIyyIT7XIBZFS9Yg-rdKAtnCCmfPE/ Regular event~~]		* Bike Repair Corner - Regular event - [https://nextcloud.at.base48.cz/apps/calendar/embed/oM82tg3RJDLDyZbz/dayGridMonth/now See calendar]
	* [https://wiki.base48.cz/wiki/Library Library]		* [https://wiki.base48.cz/wiki/Library Library]
	* Open space workstations		* Open space workstations

Labels

Thebys — Sun, 22 Mar 2026 18:38:08 GMT

Switch from preformatted to code block.

Show changes

Hackerspace

Thebys — Sun, 22 Mar 2026 16:07:29 GMT

Legal: - Add link to official court registry

← Older revision		Revision as of 16:07, 22 March 2026
Line 77:		Line 77:

	= Legal =		= Legal =
	Our legal entity is ~~base48~~, z.s.<br/>		Our legal entity is Base48, z.s.<br/>
	Registered 6.8.2010<br/>		Registered 6. srpna 2010<br/>
	IČ: 22859802		IČ: [https://or.justice.cz/ias/ui/rejstrik-firma.vysledky?subjektId=786587&typ=UPLNY 22859802], [https://or.justice.cz/ias/ui/vypis-sl-firma?subjektId=786587 sbírka listin]

	=Gallery=		=Gallery=

Regular base48 session

Thebys — Sun, 22 Mar 2026 16:04:57 GMT

Thebys deleted page Regular base48 session Irrelevant. Content was: " The council meets usually every 2 weeks on tuesday, commonly 5-6pm, at our Space, but we are often present there on other evenings as well."

Printers and printing

Thebys — Sun, 22 Mar 2026 14:00:06 GMT

Basic info on printers available at Base48.

New page

== Printers for printing on paper ==

=== HP LaserJet P4015x ===

* Common BW office laser printer
* Cheap prints

=== HP DesignJet T520 (Richard) ===

* Color printing plotter
* Prints on paper rolls, maximum print width is 914 mm
* Expensive prints

=== Samsung CLX-3185FW ===

* Can scan onto USB flash drive
* Rarely prints

== Label maker(s) ==
See [[Labels]].

== 3D Printers ==
See [[3D printing lab|3D Printing lab]].

3D printing

Thebys — Sun, 22 Mar 2026 13:53:58 GMT

Thebys deleted page 3D printing Outdated. Content was: "== Printers == * Prusa i3 MK2 - 2x functional, but currently not connected to electricity * Rostock - broken * Taz::TAZ - should be functional, no electricity == Using printers == === Hints === * Do not load E-sun filament to printers using bowden, it breaks into pieces after it sits for a while"

Buse RGB LED Panel

Klubko — Fri, 20 Mar 2026 11:26:32 GMT

@@ Line 27: / Line 27: @@
 Rows do have common CLK and LE signals. This means both halves of the row must be fed in parallel, but rows are entirely independent of each other.
 [[File:Layout.png|center|frameless|600x600px|LED & driver layout]]
 == Resources ==
@@ Line 36: / Line 46: @@
 Schematic of the 4-bit (9 pins) ESP8266-based driver: https://codeberg.org/lubko/buse004-1/src/branch/main/esp8266-adapter-buse-btc004.pdf
 == ESPHome integration ==
@@ Line 62: / Line 74: @@
         static bool state;
         it.image(0, 0, (state = !state) ? id(tux) : id(base48));
 == Pictures ==