Rostock

From base48
Revision as of 16:23, 9 November 2012 by Rmarko (talk | contribs) (link to hotend holder)

Jump to: navigation, search

Work in progress. Please help filling the "Where to get it" column in Stuff to buy table, preferably with local suppliers.

Links

Build

Printed parts

Part Required Done
platform.stl 1 1
joint.stl 12 12
jaws.stl 12 12
motor_end.stl 3 3
idler_end.st 3 3
gcarriage.stl 3 3
Airtripper's Bowden extruder
airtripper-extruder-body.stl 1 1
airtripper-extruder-idler.stl 1 2
airtripper-extruder-strut.stl 1 2
airtripper-extruder-shaft.stl 1 2
Bowden cable & hotend holder [1] 1 0

Stuff to buy

Part Required Where to get it Price Bought
Fasteners
M3 nuts
M3 washers
M4 washers 20
M4 nuts 20
M6 washers 2
M6 nuts 2
M8 washers 3
M8 nuts 4
M3x6 3
M3x12
M3x20
M3x30 3
M3x45 2
M4x40 (plywood mounting) 16
M6x30 (608 ball bearings) 2
M8x35 (608 ball bearings) 3
M8 washers 3
M8 nuts (+1 for bowden cable holder) 4
M8x35 (608 ball bearings) 3
Linear motion
GT2 Timing belt, 2mm pitch, 762 teeth 3
GT2 plastic pulley, 2mm pitch, 40 teeth 3
762x8 mm smooth rod 6 Me gusta base48 wiki.png 287 Kc tak urcite
LM8UU linear bearing 6
608ZZ skateboard ball bearing 1 kit of 10
F608ZZ 8x22x7 flanged ball bearing 1 kit of 10 possible to use 608ZZ with http://www.thingiverse.com/thing:10723 instead
MR105 ZZ Model Miniature Ball Bearing 5x10x4 1
Tubes
..
Electronics
NEMA 17 stepper motor 4


Replacement belt and pulleys:

Param Original Local
Belt https://sdp-si.com/eStore/PartDetail.asp?PartID=75955&GroupID=342 http://www.tyma.cz/eshop/produkty/03m-1530-06-12775/
Profile GT2 HDT 3M
Pitch length 1524.00 mm 1530.00 mm
Teeth 762 510
Price ~200 Kc 219.40 Kc
Pulley https://sdp-si.com/eStore/PartDetail.asp?PartID=8545&GroupID=347 http://www.tyma.cz/eshop/produkty/22-03m-06-6f-49891/
Teeth 40 22
Outside Diameter 25.00 mm 21.01 mm
Price ~127 Kc 42,30 kc